Shingle Roofing in Litchfield Park

What shingles do well, and what wears them down

Asphalt shingles fit most pitched roofs. They weigh far less than tile, go on faster, and the laminated styles give a roof depth and a range of colors that suits many houses. Their weak point is sun. Heat bakes the oils out of the asphalt, the mineral granules loosen and wash off, and the sealant strips that bond one course to the next can release.

That is why the layers below matter to us as much as the shingle you choose. Sound decking, underlayment that stays flat, nails in the right spot and an attic that breathes all help a shingle stay supple for longer.

We do this work in Litchfield Park, Goodyear, Avondale and the surrounding area. At the end you have a record of the job, from the open deck to the finished ridge.

What our shingle work includes

Full tear-off

Old shingles and underlayment come off rather than being covered over. With the deck exposed we photograph it and swap out any boards that are spongy or splitting apart, so the new roof sits on solid wood.

Synthetic underlayment and drip edge

We use synthetic underlayment because it stays flat in high heat and holds up to foot traffic during the install. Metal drip edge along the eaves and rakes sheds water away from the fascia and finishes the edge neatly.

Starter strips and careful nailing

Starter rows at the edges and fasteners driven inside the marked nailing band give the shingles their wind resistance. We install to the written instructions for the specific product on your roof.

Flashing, valleys and pipe boots

Wall joints get new step flashing, valleys are lapped and sealed the right way, and pipe penetrations get fresh boots. Plain rubber boots split early in strong sun, so we use ones rated for heat.

Attic airflow

We look at intake at the eaves and exhaust at the ridge and balance the two where the framing allows. A cooler attic means less heat cooking the shingles from underneath.

Cleanup

Tear-off goes straight into a container, away from plants and walkways. A rolling magnet goes over the yard and driveway before we pack up.

When a shingle roof is asking for attention

• Granule loss

  Dark or shiny spots mean the protective granules are gone and bare asphalt is facing the sun. You may also find gritty buildup near downspouts.

• Edges lifting or bowing

  Corners that turn up or centers that sag point to shingles that have dried and shrunk. Wind gets under them and water follows.

• Pieces missing after a storm

  Monsoon gusts can break the seal and tear tabs away. A small gap still leaves underlayment exposed to sun and rain.

• Water marks indoors

  A stain on a ceiling or attic board often starts at a split pipe boot or tired flashing rather than the shingles. We trace it and show you exactly where it begins.

• One fix after another

  When an older roof needs repairs every season, a new one can be the better use of your money. We give you a straight answer either way.

How a shingle job runs

1. 1

   First conversation

   On the phone you tell us what caught your eye, and we set a day to come see the roof. If you know its age or any past leaks, mention them so we arrive prepared.

2. 2

   On-site visit

   We walk the roof, check the attic space we can safely get to, and photograph the trouble spots. You get those images with a written, line-item estimate that says plainly whether repair or replacement fits.

3. 3

   Permit and materials

   For a full reroof we pull the required permit and order your shingles. On summer jobs we begin at first light, before the shingles soften enough to mark underfoot.

4. 4

   The work itself

   We cover plants and protect walls, strip the old roof, document the bare deck and fix what needs fixing. Underlayment, flashing and shingles follow, and you know the expected schedule before we begin.

5. 5

   Walk-through

   After cleanup we go over the job with you, including the deck repairs that are now hidden under the new roof.

What shapes the price of a shingle roof

Every estimate is built from measurements and what we see on your roof, and each part sits on its own line. Some items move the total more than others. A figure offered before anyone has climbed up is only a guess.

Area and steepness

More square footage and a steeper pitch mean more material and slower, safer work. Hips and valleys add cuts and waste.

The shingle you pick

Three-tab, thicker architectural and reflective cool-rated shingles each carry a different price. The heavier laminated lines cost more and usually last longer.

Condition of the decking

Soft or delaminated boards stay hidden until the tear-off exposes them. We note in writing, before work starts, how any board swaps are billed, and you get a photo of each piece of wood we replace.

Existing layers

If there are two old layers instead of one, removal takes longer and disposal costs more.

Roof penetrations and vents

Chimneys, skylights, wall connections and new ridge vent each need extra material and slow, careful detailing.